Filter
Top Products
ENGLISH
29
Transmission Setting (Continued)
5
Press a/b to move the cursor to
“PRESET”, and press ENTER.
6
Press a/b to move the cursor to
“TRANSMISSION SETTING”, and press
ENTER.
[2] Setting Channel
Four settings can be selected for the communication channel consisting of
Auto, A, B and C. When set to “AUTO”, available channels that can be
transmitted are set automatically. It is recommended to normally set the
communication channel to “AUTO”.
AUTO A B C
1
Press a/b to select “CHANNEL”, and
then press ENTER.
2
Press c/d to select “AUTO”, and then
press ENTER.
• The available settings change in the
order shown below each time
c/d is pressed.
AUTO A B C
•“ADJUSTING CHANNEL SETTING.” is
displayed on the screen and the
communication channel is set
automatically.
M
ENU
SLEEP TI
M
ER
VIDEO ADJUST
PRESET
CLOSED CAPTION
V–CHIP BLOCK
SET UP
SELECT: ENTER: EXIT:
ENTER
MENU
BRIGHTNESS [BRIGHT]
M
TS
AUTO PO
W
ER OFF
RETURN
[STEREO]
[OFF ]
PICTURE FLIP
AV2 IN/OUT
BATTERY
CHARGE
[NOR
M
AL]
[IN ]
PRESET
TRANSMISSION SETTING
SELECT: ENTER: EXIT:
ENTER
MENU
STATUS:A
[ A]
DISTANCE
RETURN
[ FAR]
STATUS:NEAR
TRANSMISSION SETTING
CHANNEL
SELECT:
ENTER: EXIT:
ENTER
MENU
Displayed in yellow
BATTERY CHARGE and TRANSMISSION SETTING (Continued)
ADJUSTING CHANNEL SETTING.
CHVOL
POWER
ENTER
DISPLAY
MUTE
SLEEP PIC. FLIP
BRIGHT TV/VIDEO MENU
FLASH-
BACK
ENTER/
a/b/c/d
MENU
[AUTO]
DISTANCE
RETURN
[ FAR]
STATUS:NEAR
TRANSMISSION SETTING
CHANNEL
SELECT:
ENTER: EXIT:
ENTER
MENU