Filter
Top Products
62
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
TROUBLESHOOTING
Problem Check item
Reference
pages
There is no
picture.
There is no
picture from
AV-IN1/2.
13
–
32
31
Sound
Picture
• Make sure the AC adapter is properly inserted in the power outlet.
• Reception other than those of broadcasting stations can be consid-
ered.
• Make sure the input mode is set to TV.
• Make sure the MAIN POWER buttons of the main unit and Wireless
Center are on.
There is no
picture or
sound.
Picture
• Make sure the BLACK LEVEL is properly adjusted.
• The fluorescent lamp may have reached the end of service life.
• Make sure the S-VIDEO terminal has nothing connected.
There is no
sound.
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure that headphones are not connected.
There is no
picture or
sound, just
noise.
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
Picture is not
clear.
Picture is light
or improperly
tinted.
• Check color adjustment.
The picture is
too dark.
• Press the BRIGHT button or set the BRIGHTNESS settings.
• Check PICTURE and BLACK LEVEL adjustment.
• The fluorescent lamp may have reached the end of service life.
Remote control does not work.
• Check the batteries of the remote control.
• Make sure the remote sensor window is not under strong lighting.
41
65
56, 60
33
33
16
12
–
12
–
41, 42
37
41
65
11
11
• The broadcasted EDS signal may be weak. Check the antenna.
• Carry out EZ SETUP, SETTING THE CLOCK again.
• If EDS signal is not sent, set the clock using the MANUAL CLOCK
Setting.
–
22-26
26
The clock (AUTO CLOCK) cannot
be set.
• The radio waves used by the product are high frequency, so that
there are features such as direct advance travelling, reflection,
refraction, diffraction, interference etc., similar to that of light. The
strength of the waves therefore varies depending on the location,
which may cause the pictures and sound to become unclear,
become wavy, or stop.
• Is the distance between the Wireless Center and the television
product too far? Use within a range that the radio waves can reach.
• Are you at a location that is particularly susceptible to electrical
noise?
• Set “DISTANCE” to “FAR”.
• The product utilizes wireless transmissions, so that fast moving
images may become distorted, but this is not a malfunction.
9
–
9
30
–
Blocks of noise appear on the
pictures. Sound becomes inter-
rupted.
■ Before calling for repair services, make the following checks for possible remedies to the encountered symp-
toms.
TV set