Filter
Top Products
28
BATTERY CHARGE and TRANSMISSION SETTING
Battery Charge
The “BATTERY CHARGE” is set to “ON” when shipped from the factory. The
battery will deteriorate if it continues to be charged after having been fully charged.
It is recommended to set the “BATTERY CHARGE” to “OFF” when the battery
is not used frequently.
1
Press MENU to display the MENU
screen.
2
Press a/b to move the cursor to
“PRESET”, and press ENTER.
3
Press a/b to move the cursor to
“BATTERY CHARGE”, and press
ENTER.
4
Press c/d to change the setting, and
press ENTER.
5
Press MENU to return to the main
screen.
Transmission Setting
When shipped from the factory, the “CHANNEL” of the “TRANSMISSION
SETTING” is set to “AUTO”, and the “DISTANCE” is set to “NEAR”. However,
when reception is poor due to the presence of an interference source in close
proximity, change the settings for “CHANNEL” or “DISTANCE” to ensure normal
reception.
ENTER/
a/b/c/d
MENU
[1] Preparing for “TRANSMISSION SETTING”
1
Connect the antenna to the Wireless
Center.
2
Install the Wireless Center and TV
receiver next to each other.
3
Turn on the power for both the Wireless
Center and TV receiver.
4
Press MENU to display the MENU
screen.
CHVOL
POWER
ENTER
DISPLAY
MUTE
SLEEP PIC. FLIP
BRIGHT TV/VIDEO MENU
FLASH-
BACK
M
ENU
SLEEP TI
M
ER
VIDEO ADJUST
PRESET
CLOSED CAPTION
V–CHIP BLOCK
SET UP
SELECT: ENTER: EXIT:
ENTER
MENU
AC cord
AC wall
outlet
AC adapter
Wireless
Center
Transmission
TV main unit
NOW ACCESSING.
BRIGHTNESS [BRIGHT]
M
TS
AUTO PO
W
ER OFF
RETURN
[STEREO]
[OFF ]
PICTURE FLIP
AV2 IN/OUT
BATTERY
CHARGE
[NOR
M
AL]
[IN ]
PRESET
TRANSMISSION SETTING
SELECT: ENTER: EXIT:
ENTER
MENU