Filter
Top Products
E-20
Computer Mode Memory Adjustments
• The projector has been preset with different modes for
use with SVGA and other compatible computers.
However, 7 memory positions are provided to store
mode adjustments.
• Each memory position can be used to store mode
adjustments to match the computer.
1. Press the ENTER button to select the
Memory Adjustment mode
• Press the MENU button. While the MENU screen
is displayed, press the ADJUSTMENT ƒ/∂ but-
tons to select “RGB1 INPUT ADJ.” Press the
ENTER button. The MENU mode changes as
shown.
• While the RGB INPUT adjustment menu is dis-
played, press the ADJUSTMENT ƒ/∂ buttons to
select “MEMORY SELECT”. Then press the
ENTER button to change the image.
2. Press the ADJUSTMENT ß/© buttons
• The screen shown on the left will appear. There
are 7 memory positions.
• Press the ADJUSTMENT ƒ button once to move
to the following screen. Press the ADJUSTMENT
ß/© buttons to select the number of the memory
you want to adjust. If that memory position has
not been set, the screen on the right will be dis-
played. If it has been set, the screen on the left
will be displayed. MEMORY No.0 cannot be set. It
contains the fixed factory preset settings.
• To make or change a setting, press the ADJUST-
MENT ƒ/∂ buttons to move the cursor to “SET-
TING.” Then press the ENTER button to go to the
RGB INPUT adjustment menu screen. (If you do
not want to make any adjustments, press the
MENU button.)
• Select the item you want to adjust by pressing the
ADJUSTMENT ƒ/∂ buttons, then use the AD-
JUSTMENT ß/© buttons to make the adjust-
ments. When adjustments are completed, press
the MENU button. The display disappears and
the adjustments are stored in memory as a user
mode. See page 19 for details on the adjustment
items.
3. Press the MENU button anytime to exit
RGB INPUT ADJ.
1 When RGB 1 or 2 is selected.
2
RGB1 ADJ.
RGB1 INPUT ADJ.
IMAGE ADJ.
AUDIO
SYSTEM SETUP
LANGUAGE
:SEL. :NEXT
ENTER
:END
MENU
RGB1 INPUT ADJ.
PHASE
H-POS
V-POS
MODE
RESET
MEMORY SELECT
+
0
0
0
0
:SEL. :NEXT
ENTER
:END
MENU
[
OFF
]
-
+
-
+
-
+
-
CLOCK
MEMORY SELECT
:SEL.
:ADJ.
ENTER
:END
MENU
0 1 2 3 4 5 6 7
STANDARD SETTING STANDARD SETTING
SETTING
:ENTER
MEMORY SELECT
SETTING
:SEL. :BACK
ENTER
:END
MENU
0 1 2 3 4 5 6 7
MEMORY SELECT
NON
SETTING
:SEL.
:ADJ.
ENTER
:END
MENU
0 1 2 3 4 5 6 7
:ENTER
MEMORY SELECT
:SEL.
:ADJ.
ENTER
:END
MENU
0 1 2 3 4 5 6 7
RESOLUTION
HOR FREQ
VERT FREQ
SETTING
:ENTER
Hz
KHz 60.0
75
1024×768
On-Screen Display