Filter
Top Products
E-28
Using the Blue Screen Function
This projector is equipped with a Blue Screen function
that will turn the screen blue when the video input termi-
nal is not connected to anything, or the video component
is turned off.
• Press the MENU button. While the MENU screen is displayed,
press the ADJUSTMENT ƒ/∂ buttons to select “IMAGE
ADJ.”. Then press the ENTER button to display the “IMAGE
ADJ.” screen as shown. Press the ADJUSTMENT ƒ/∂ but-
tons to select “BLUE SCREEN,” and press the ADJUST-
MENT ß/© buttons to select “ON” or “OFF”. Press the MENU
button to return to the normal screen.
• When the Blue Screen function is on, the screen will turn blue
when no video signal is being input through the video input
terminal.
• When the Blue Screen function is on, and no video signal is
input via the input terminal for more than 15 minutes, the
power is automatically turned off.
• The indicators appear as shown each minute before the
power is turned off, from 5 minutes before until 1 minute
before.
Notes:
• The Blue Screen Function does not operate in RGB mode.
• When the power is turned off, the POWER indicator will light red.
• To turn the power on again, press the POWER button to set it to OFF,
then press it again to set it to ON.
On-Screen Display
Using the Input Mode On-Screen Display
Override Function
The On-Screen Displays that appear during input select
(“RGB 1,024 ן 768, 75 Hz,” etc.) can be turned off.
Once “INPUT DISPLAY” is turned off, the On-Screen Dis-
plays will not appear even if the INPUT CHECK button on
the remote control is pressed.
• Press the MENU button. While the MENU screen is displayed,
press the ADJUSTMENT ƒ/∂ buttons to select “IMAGE
ADJ.”. Then press the ENTER button to display the “IMAGE
ADJ.” screen as shown. Press the ADJUSTMENT ƒ/∂ but-
tons to select “INPUT DISPLAY”, and press ADJUST-
MENT ß/© buttons to select “ON” or “OFF”.
• When “OFF” is selected, the On-Screen Display (“RGB
1,024 ן 768, 75 Hz,” etc.) will not be displayed during input
select.
BLUE SCREEN
BLK SCRN DISP
IMAGE ADJ.
REVERSE
INVERT
INPUT DISPLAY
[
OFF
]
[
OFF
]
[
OFF
]
SYSTEM
[
OFF
]
[
ON
]
:SEL.
:ADJ.
:END
MENU
REMAIN 5M
REMAIN 4M
REMAIN 1M
BLK SCRN DISP
IMAGE ADJ.
REVERSE
INVERT
INPUT DISPLAY
:SEL.
:ADJ.
:END
MENU
[
OFF
]
[
OFF
]
[
OFF
]
[
OFF
]