Sherwood V-756 DVD Player User Manual


 
29
SETTING THE SYSTEM
󳀏You can use the unit as DVD player or as a digital surround sound decoder (or both).
󳀏For use as a surround sound decoder, be sure to connect the DIGITAL OUTs of the associated source unit to
the DIGITAL INs of this unit.
󳀏(Refer to
CONNECTING TO ADDITIONAL COMPONENT WITH VIDEO AND DIGITAL OUTS on page 7.)
󳀏Depending on your use, tilt the CURSOR/ENTER button upward or downward to select the item, then
press the CURSOR/ENTER button.
Note :
󳀏When the
EXT OPTICAL or EXT COAXIAL is seleted to use this unit as a built-in decoder, only the
AUDIO SETUP on the SETUP menu can be selected and most of the function buttons such as PLAY,
OPEN/CLOSE,etc. for DVD player operation will not work.
To use as a DVD player
To use as a surround sound decoder for the digital audio signal from
the OPTICAL DIGITAL IN of this unit.
To use for the digital audio signal from the COAXIAL DIGITAL IN.
󳀏The selected item is highlighted.
For the lower
For the upper
󳂟
SYSTEM SELECT : +
DVD PLAY
EXT OPT ICAL
E X T C O A X I A L
RETURN : SETUP : F I NI SH
RC
RC
ENGLISH