Sherwood V-756 DVD Player User Manual


 
9
ENGLISH
󳀏For some countries like Europe, the unit incorporates the TV and VCR SCART connectors.
󳀏You can connect the unit to TV and VCR easily using the SCART connections without other cumbersome audio
and video connections.
󳀏During operation of the unit, these connectors can deliver either the regular video and RGB signals or the S-
video (Y and C) signals as well as the mixed audio L and R signals.
󳀏To obtain the highest picture quality, you can make the COMPONENT VIDEO connections between the unit
and TV.
󳀏Depending on the video signal(s) to be used, adjust the COMPONENT VIDEO and SCART OUTPUT settings
to your preference and set your TV and VCR to the corresponding one to match the selected settings of the
unit.
󳀏(Refer to “When selecting the COMPONENT VIDEO (Regional Option)” on page 37, “When selecting the
SCART OUTPUT (Regional option)” on page 38 and the operating instructions of the component(s)
connected.)
Note
󳀏In this connection, do not connect the unit to the TV through a VCR. Otherwise the image may be disturbed due
to the copy protection function.
CONNECTING TO TV AND VCR WITH SCART CONNECTORS (Regional Option)
󳀏In this connection, to view a program source from the VCR on the TV screen or to record a TV broadcast onto
the VCR, be sure to turn the unit off to enter the standby mode.
This unit
Monitor TV
VCR
21-pin SCART
cable (not supplied)
21-pin SCART
cable (not supplied)