Filter
Top Products
34
When the 6.1 CH AUDIO OUTS of the unit are connected to the 6.1 (or 6) CH INs of your amplifier or receiver to enjoy
high-quality audio and surround with the built-in decoder, these items should be set correctly.
Tilt the CURSOR/ENTER button upward or downward to select SPEAKER OPTIONS, then press the CURSOR/ENTER
button.
When selecting the SPEAKER SETUP
Depending on your speaker type, you can select one of
these following speaker types.
LARGE : Large speaker(s) which can fully reproduce the
low frequency range.
SMALL : Small speaker(s) which cannot fully reproduce
the low frequency range.
NONE : No speaker(s) connected. (It can be selected in
the speaker types other than FRONT L/R TYPE.)
PRESENT : A speaker is connected. (It can be selected
in the R-CENTER TYPE only.)
LFE : When reproducing only the separate low frequency
range that be contained in multi-channel sound
systems such as DTS, Dolby Digital, MPEG
Multichannel,etc. (It can be selected in the
SUBWOOFER OUT only.)
MIXED : When mixing the low frequency range of the
speaker(s) which is set to
SMALL with that of
subwoofer and reproducing them. (It can be
selected in the SUBWOOFER OUT only.)
Example) When selecting the FRONT L/R TYPE
To adjust the speaker setting.
To adjust each channel level
equally loud. (See next page.)
2
Tilt the CURSOR/ENTER button upward or downward to select the preferred item, then press the
CURSOR/ENTER button.
3
Tilt the CURSOR button upward or downward to
select the preferred speaker type, then press the
CURSOR/ENTER button.
3
Enter the distance 17 cm with the NUMERIC
button, then press the CURSOR/ENTER button.
1
Tilt the CURSOR/ENTER button upward or downward to select SPEAKER SETUP, then press the
CURSOR/ENTER button.
You can enter up 999 cm as the distance between the
speaker and prime listening position.
One foot equals about 30 cm.
Notes :
When the NONE is selected respectively for the front
center and rear speaker types, the front distance cannot
be entered.
When the NONE is selected for the front center or the rear
speaker type, the corresponding speaker distance cannot
be entered.
Example) When entering
150 cm.
To adjust the speaker size
connected.
To adjust the delay time.
To adjust the speaker setting
depending on whether the
speaker is connected or not.
To reproduce the low
frequency range depending on
the speaker settings.
Example) When selecting the DISTANCE
When selecting the SPEAKER OPTIONS
SELECT : +
RETURN: SETUP : F IN ISH
SPEAKER OPT
SPEAKER SE
TEST NOISE
TUP
SPEAKER SETUP
FRONT L /R T
T
Y
DISTA
F-CE
REAR
NTER
PE
L/R TYPE
DISTANCE
LA
N
Y
CE O
RGE
R-CENTER TYPE NON
SUB
W
OOFER OUT M I XED
E
CM
DISTANCE O CM
OCM
PE SMALL
SMALL
SELECT :+
RETURN: SETUP: F INISH
---CM
FRONT L/R TYPE LARGE
SMALL
DISTANCE
RC
RC
RCRC
RCRC
Continued
ENGLISH