Filter
Top Products
ENGLISH
12
■Notes :
• Some functions for each component may not be
available or may work differently.
• Depending on other kinds of components that are
available for each DEVICE button, some functions
may not be available or may work differently, too.
• For details about functions, refer to the operating
instructions of each component.
■FUNCTION TABLE of the NUMBERED BUTTONS.
(
for TV)
P
OWER ON
S
TANDBY
MUTE
C
HANNEL UP
CHANNEL DOWN
VOLUME
U
P/DOWN (+/-)
INPUT
S
ELECTOR
N
UMERIC
(
for Cable box)
P
OWER ON
S
TANDBY
MUTE
C
HANNEL UP
CHANNEL DOWN
VOLUME
U
P/DOWN (+/-)
INPUT
S
ELECTOR
N
UMERIC
(for Satellite receiver)
P
OWER ON
STANDBY
MUTE
C
HANNEL UP
CHANNEL DOWN
VOLUME
U
P/DOWN (+/-)
INPUT
S
ELECTOR
N
UMERIC
5. Repeat the above steps 1 to 4 for each of your
components.
enteRInG A setUP coDe
• This remote control can control up to 3 different components.
• Before operating video components other than this unit with using this remote control, the setup code for each component
should be entered.
• The LED will flicker once.
■Note :
• The MAIN button is unavailable for the components other
than this unit.
1. Turn on the component you want to operate.
2. Find the setup codes according to the type and
the brand name of your component, referring to
“Setup Code Table” on page 54.
3. Press and hold down both the OK button and
the DEVICE button you want for more than 1
seconds.
4. Enter a 3 digit code.
Example: When entering “001”.
• If entering is performed successfully, the LED will flicker
twice.
• To be sure that the setup code is correct, press the
POWER ON (or STANDBY) button, aiming the remote
control at the remote sensor on the component. If your
component is turned off, the setup code is correct.
• When your component is not turned off, repeat the above
steps 2 to 4, trying each code for your component until
you find one that works.
■Notes:
• If the LED did not flicker twice, then repeat the above
steps 3 to 4 and try entering the same code again.
• Manufacturers may use different setup codes for the same
product category. For that reason, it is important that you
check to see if the code you have entered operates as many
controls as possible. If only a few functions operate, check to
see if another code will work with more buttons.
: For TV
: For cable box
:For satellite receiver
VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 12