Silvercrest KH2150 Universal Remote User Manual


 
ENTER CODES
With the ENTER CODES function, you locate the device code
in the enclosed manual “Manufacturer List with Device Code
List“.
Note:
To conclude your input, press the EXIT button (8).
1. Switch on the device for which you would like to program
the remote control.
2. Hold the
S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). LIST CODES appears in
the LCD display (2).
4. Press the down arrow button (6). ENTER CODES appears
in the LCD display (2).
5. Press the right arrow button (6). MODE KEY appears in
the LCD display (2).
6. Press the desired device button (4). The LCD display (2)
shows CODE 0001, for example. Find the device code in
the manual "Manufacturer List with Device Code List".
7. Enter the device code with the number buttons (13).
SUCCESS appears in the LCD display (2). If the entered
device code is incorrect, the message CODE ERROR
appears in the LCD display (2). Repeat steps 2 to 8.
Repeat steps 1 to 8 for all devices that you would like to
operate.
SEARCH CODES
Automatic search
Automatically search for the device code within the internal
list of the remote control.
Note:
To conclude your input, press the EXIT button (8).
1. Switch on the device for which you would like to program
the remote control.
2. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). LIST CODES appears in
the LCD display (2).
4. Press the down arrow button (6) repeatedly until SEARCH
CODES appears in the LCD display (2).
5. Press the right arrow button (6). MODE KEY? appears in
the LCD display (2).
6. Press the desired device button (4). DEVICE? TV appears
in the LCD display (2).
17
IB_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:52 Uhr Seite 17