MACRO-SETUP – Macro functions
With the macro function, you can save a sequence of button
presses. The saved macro can be loaded with the
MACRO button
(11) and the number buttons (13)
1, 2 or 3. The saved button
sequence is executed automatically.
An example of a button sequence would be:
• Switch on television.
• Change television channel.
• Switch on VCR.
• Record programme.
The macro function an store three different macros. Each
macro can contain a maximum sequence of ten buttons.
MACRO-SETUP overview
MACRO SET
Programming and saving a macro.
1. Hold the
S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until MACRO-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MACRO SET appears in
the LCD display (2).
4. Press the right arrow button (6). MACRO KEY? appears in
the LCD display (2).
5. Press the number button (13)
1, 2 or 3. The LCD display (2)
shows MACRO 1 MOD.?, for example.
6. Press the desired device button (4). MACRO 1 KEY! 02
appears in the LCD display (2).
27
IB_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:52 Uhr Seite 27