Silvercrest KH 2155 Universal Remote User Manual


  Open as PDF
of 34
 
- 23 -
4. In the LCD display q appears "SUCCESS".
5.
With the EXIT button j you exit the mode.
Additional functions
To operate one of the programmed devices with the >
URCrstpressthecorrespondingdevicebuttonr.
Then point the URC to this device and press the desired
>
button.
Put the number buttons
> o exactly as you do with the
original remote control. Before you make a two digit
entry press the
button s.
With the
> button a you can select the respectively
last selected programme memory slot.
Press the GUIDE button
> g to start the electronic pro-
gramme guide of a device equipped with this function.
Press the INFO button
> k to show current programme
information from the target device.
Via the MENU button
> 1( you access the dialogue for the
setting of the respective target device.
All OFF
Note:
With the button ALLOFF(allo)w all devices can be
automaticallyswitchedo.ForthispresstheALLOFFbuttonw
twice within 2 seconds. This will only function under the fol-
lowing circumstances:
1. A visible connection exists between all the devices and
the URC.
2. Automatic code search, brand code search and MACRO
function are not active.
3. All target devices must be suitable for remote control
switcho.
To automatically switch on all devices again press the button
w once more twice within 2 seconds.
 previous next