Filter
Top Products
- 4 -
First use
Unpacking the device / checking the package
contents
Attention!
Keep the plastic packaging well away from small children.
There is a risk of suocation.
Unpack the device and accessories. •
Check the package contents, •
- Universal remote control,
- Operating instructions,
- Manufacturer list with device code list
Remove the protective foil from the LCD display • q.
Note: Transport damage
If you notice any transport damage contact the manufacturer
or the manufacturer's Service-Hotline (see warranty card).
Inserting the batteries
Attention!
The Universal remote control must only be operated with
1.5 Volt batteries (Type AAA, LR03).
Carry out the battery change as quickly as possible. Preset
settings will remain saved for approx. 1 minute. If new batteries
have not been installed within this time all of the settings will
have to be carried out again. The time of day will, however,
in any case be deleted.
1. Open battery compartment cover 2& in the direction of
the arrows.
2. Insert the batteries as shown in the diagram and close
the battery compartment.
The LCD display q is activated as long as batteries are installed.
The following diagram shows the LCD display q after the
batteries have been installed or changed.