Filter
Top Products
1 Press the Mark button once during playback.The
bookmark menu is displayed on the screen
Fig. 21 Display of the bookmark function
2 As soon as the playback has reached the point at
which you would like to set the bookmark: Press
the Play button once. The following is displayed:
For Audio CDs/VCDs/S-VCDs:
Ú
The number of the track that contains the selected
passage.
Ú
The time position of the bookmark in minutes and
seconds.
For DVDs:
Ú
The number of the title that contains the selected
passage.
Ú
The number of the chapter that contains the se-
lected passage.
Ú
The time position of the bookmark in hours, min-
utes and seconds.
3 If you would like to set additional bookmarks: Use the
up/down/left/right control buttons to select additional
memory positions for bookmarks. Press the Play but-
ton again when you would like to set the bookmark.
4 Repeat steps 2 and 3 until you have set all the de-
sired bookmarks. To delete bookmarks: Select the
number of the bookmark with the
up/down/left/right control buttons. Then press the
CLR button. The bookmark is now deleted.
Once you have set all the desired bookmarks, press
the "Mark" button once to hide the bookmark
menu on the screen.
5 If you would like to skip to the passages at which
you have set bookmarks at a later time: Press the
Mark button again. The bookmark menu is display-
ed on the screen.
6 Select the desired bookmark with the control
buttons.Then press the Play button. Playback starts
immediately at the location at which you set the
selected bookmark.
11.4.5. Using the Program Function
With the program function, you can combine …
Ú
Audio CDs/VCDs/S-VCDs tracks
Ú
DVDs chapters
into an individual title/chapter/file sequence.You can speci-
fy the order in which the titles/chapters/files should be play-
ed.You can combine a maximum of twenty
titles/chapters/files for programmed playback.
Ô
What are titles and chapters? On this topic,
please refer to Section19. "Glossary / Key Word
Index".
To combine titles/chapters/files for programmed play-
back:
1 For audio CDs/VCDs/S-VCDs: During playback or
while playback has been stopped, press the Pro-
gram button once. The program menu is displayed
on the screen:
Fig. 22 Display of the program menu for audio CDs
Each of the numbered fields stands for one of the
available program memory positions for titles. You
must enter the desired title numbers after these
numbers.
1 For DVDs: During playback or while playback has
been stopped, press the Program button once. The
program menu is displayed on the screen:
Fig. 23 Display of the program menu for DVDs
27
BOOKMARK
IB_DVD_KH6507_GB.qxd 19.10.2004 9:53 Uhr Seite 27