Filter
Top Products
SUR-25 User Manual
Ch.
SUR-25 User Manual
Ch.
Page
17
Choosing a DeviceChoosing a Device
Choosing a DeviceChoosing a Device
Choosing a Device
Before you can program the SUR-25 to operate your
TV. VCR etc... you have to create a device screen for
each device to use. Once programmed, devices are
selected by pressing one of the eight device buttons
located at the bottom of the unit. Keep pressing a button
to cycle through the devices available with that button.
Each device button is capable of storing from 0 to 10
devices. For example, you may have two TVs stored in
the TV button and three VCRs stored in the VCR button,
while having nothing stored in the AUX button. The unit is
capable of storing a total of ten devices using any
combination of the 8 device buttons.
The display window in the upper right hand corner of
the unit shows the name of the device or its “label”. If
there is no device programmed for that button, it will
display “EMPT” meaning empty.
When you create a new device you give it a name or
“label”. After creating a device, you will be able to enter a
pre-programmed code, “teach” an existing remote or
customize the control layout to suit your needs. There are
two ways to do this based on what starting point you want
to work from:
• Create new Device: Use this method for setting up
a new device.
• Modify Existing Device: Use this if you are having
a problem with an already setup device and want to
make a change or enhancement.
Choose DeviceChoose Device
Choose DeviceChoose Device
Choose Device
33
33
3
Page
44
Setting Up a New Timer
Press and hold the MACRO
button on the Touch Screen
for 3 seconds.
Press each number button (2,
4, 6, 8) until it disappears. Use
the arrow buttons on the Touch
Screen to select TIMR and then
press the OK button.
1. Choose one of the eight
available timers by pressing
the number on the Touch
Screen.
OFF : Off (no timer)
DAIL : Daily
SPEC : Specific Day/Time
1-5 : Every Mon – Fri
1-6 : Every Mon – Sat
SUN : Every Sunday
MON : Every Monday
TUE : Every Tuesday
WED : Every Wednesday
THU : Every Thursday
FRI : Every Friday
SAT : Every Saturday
2. Use the arrow keys to select
the timer type.
3. Press OK to confirm timer type.
Macro TimersMacro Timers
Macro TimersMacro Timers
Macro Timers
66
66
6