Filter
Top Products
SUR-25 User Manual
Ch.
SUR-25 User Manual
Ch.
Page
19
Labeling a DeviceLabeling a Device
Labeling a DeviceLabeling a Device
Labeling a Device
Naming devicesNaming devices
Naming devicesNaming devices
Naming devices
33
33
3
The SUR-25 can store more than one device in each device
button. For example, you may use the SUR-25 to operate two
televisions sets . To reduce confusion, you can assign names
or labels to each device. The label
appears in the upper right hand
display window.
Step 1 - Press and hold the SETUP
button on the Touch Screen. Press
each number button (2, 4, 6, 8) until it
disappears. Use the arrow buttons on
the Touch Screen to select LABL and
then press the OK button.
Step 2 - Use the UP and DOWN
arrows to change the letters. Use the
LEFT and RIGHT arrows to position
the cursor. (Labels can be 4 digits
long.)
Step 3 - Press the OK button when
finished.
Page
42
Using Macros
To start a Macro for a specific device, first select the
device and then simply press the key assigned to the
Macro. If you forget which keys have Macros assigned to
them, press the MACRO button and all keys with valid
Macros will be shown. During the Macro transmission, all
commands will be shown on the Touch Screen as they are
sent.
33
33
3
MacrosMacros
MacrosMacros
Macros
Deleting a Macro
Deleting a Macro is actually simply a matter of deleting
the key that the Macro has been assigned to. For example if
you assigned a Macro to the TV1 device’s #1 key, you can
erase the Macro by deleting the number “1” key in the TV1
device. For more information on how to delete a specific key
please see page 32.