Sony BDP-S190 Blu-ray Player User Manual


 
26
The [Control for HDMI] function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] is set
to [On] (page 22).
, If you change the HDMI connection,
turn the player off and on again.
, If power failure occurs, set [Control
for HDMI] to [Off], then set [Control
for HDMI] to [On] (page 22).
, Check the following and refer to the
instruction manual supplied with the
component.
the connected component is
compatible with the [Control for
HDMI] function.
the connected component’s setting
for the [Control for HDMI] function
is correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
if the AV amplifier (receiver) is not
compatible with the [Control for
HDMI] function, you may be unable
to control the TV from the player.
if you change the HDMI
connection, disconnect and
reconnect the AC power cord
(mains lead), or a power failure
occurs, try the following:
1Switch
the input selector of the AV
amplifier (receiver) so that the
picture from the player appears on
the TV screen.
2Set [Control for
HDMI] to [Off], then set [Control
for HDMI] to [On] (page 22). Refer
to the instruction manual supplied
with the AV amplifier (receiver).
The System Power-Off function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] and
[HDMI:Linked to TV-off] are set to
[On] (page 22).
Playback does not start from the
beginning of content.
, Press OPTIONS, and select [Play from
start].
Playback does not start from the
resume point where you last stopped
playing.
, The resume point may be cleared from
memory depending on the disc when
you open the disc tray.
you disconnect the USB device.
you play other content.
you turn off the player.
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, Try the following: 1Turn the player
off, and disconnect the AC power cord
(mains lead).
2Reconnect the AC
power cord (mains lead) while
pressing down Z on the player.
3Keep pressing down Z on the player
until the tray opens.
4Remove the
disc.
5Hold down [/1 on the player
for more than 10 seconds until the
player turns off.
Control for HDMI (BRAVIA
Sync)
Others