Filter
Top Products
Step 3: Hookups (continued)
Hookup 1: VCR setup
1 Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set
the switch to either channel.
For details, see page 87.
If you made A / V connections (from page 9),
you can skip this step.
2 Turn on your cable box.
3 Press EASY SET UP on the VCR.
1
The LANGUAGE menu appears. Change the
SET UP LANGUAGE
on-screen display language to Spanish
(ESPANOL) or French (FRANCAIS) if desired,
ENGLISH
and press OK. For details, see page 32.
ESPANOL
FRANCAIS
Use to select
Then push OK
Push EASY SET UP to quit
2
The CLOCK SET menu appears. Select
SET UP CLOCK SET
AUTO and press OK. For details, see page 33
AUTO MANUAL
Use to select
Then push OK
Push EASY SET UP to quit
3
The SMART CH MAPPING menu appears.
SET UP SMART CH MAPPING
Press CURSOR to enter the ZIP/
POSTAL CODE in your area and press OK. (You
ZIP / POSTAL CODE
can also use the number buttons to enter the
ZIP / POSTAL CODE.)
Enter your ZIP / POSTAL
CODE using 0 - 9, or
and keys,
then push OK
4
The CABLE BOX menu appears. Select ON. For
SET UP CABLE BOX
details, see page 39.
CABLE BOX CONTROL
CABLE MOUSE ON OFF
BOX CODE NO. -- -- --
BOX OUTPUT CH CH3
Use to select
Push EASY SET UP to quit
5
Enter your cable box code number and press
SET UP CABLE BOX
CURSOR
For details, see page 40.
CABLE BOX CONTROL
CABLE MOUSE ON OFF
BOX CODE NO. -- -- --
BOX OUTPUT CH CH3
Enter your CABLE BOX
Code No. Using 0 - 9 keys
Refer to the Operating
Manual for the code
12
Getting started
1 2 3 -- --