Filter
Top Products
6
Select your cable box
output channel and
SET UP CABLE BOX SET UP
press OK.
CABLE BOX CONTROL
CABLE MOUSE ON OFF SET UP is done
BOX CODE NO. -- -- --
BOX OUTPUT CH CH3
Use to select
Push EASY SET UP to quit
Hookup 1: VCR Plus+ channel setup
Normal display
MENU
1
Press MENU and select SET VCR Plus+
TIMER SET / CHECK
CHANNELS.
TUNER PRESET
CLOCK SET
LANGUAGE
SET VCR Plus+ CHANNELS
CABLE BOX CONTROLS
ADVANCED OPTIONS
Use to select an
item, then push OK
SMART CHANNEL MAPPING
AUTO MANUAL
2
Press CURSOR
AUTO and press OK.
3
Press POWER to turn off the VCR.
Use to select
Then push OK
Push MENU to quit
The VCR receives the program information signal from 0:00 am to 5:00 am while the VCR is turned off, and
set up the channel for VCR Plus+ recording. After channel setup is finished, you can record TV programs
using VCR Plus+. For details, see page 49.
Notes
* To use auto VCR Plus+ channel setup feature, leave the cable box on.
* It takes about 1 hour to complete channel setup.
* The VCR can receive the program information signal only while the VCR is turned off and no timer
recordings are set.
* If the channels in your area don't carry the program information signals, set the program guide channels
manually. For details, see page 51.
* If the Choose you Cable CH MAP menu appears the first time you turn on the VCR after finishing
channel setup, select the MAP number. For details, see page 50.
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you turn off the VCR. After that,
whenever you turn off the VCR, it checks the time and adjusts the clock, even for Dayligh Saving Time. The
VCR sets the clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your area do not carry time signals,
set the clock manually. For details, see page 37.
Note
* To use the automatic clock setting feature, leave the cable box on.
continued
13