Filter
Top Products
Audio/video (A/V) hookup Pages 9 and 10
If your TV has audio / video (A / V) input jacks, you will get a better picture
and sound if you hook up your VCR using these connections. In addition,
for a true "home theater" experience, you should connect the audio outputs
of your VCR or TV to your stereo system. If your TV doesn't have A / V
inputs, see the following pages for antenna or cable hookups.
If your TV has the S-Link™* (A / V bus control) function, hook up your VCR
using the connection shown on page 10. Your TV will automatically switch
to the A / V inputs for your VCR when you play back or operate menu on the
VCR.
If you're not planning to use your VCR to record programs, you're finished
setting up the VCR after you've made the connections shown on pages 9 and
10. If you want to record off-air or off your cable TV system, complete these
connections first, then go to the following pages for antenna or cable
hookups.
* S-Link™ is a trademark of Sony Corporation
A
Use this hookup if your TV has stereo jacks
* Do not connect the miniplugs for this hookup.
B
Use this hookup if your TV doesn't have stereo jacks
9
continued
9
VCR
TV
Stereo receiver
Audio/video cable (supplied)
Audio/video cable (not supplied)
VCR
TV
Stereo receiver
Video cable (not supplied)
Audio cable (not supplied)