Filter
Top Products
Hookup 3 Pages 17 to 19
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV.)
A
Use this hookup if you're using:
* VHF / UHF antenna (you get channels 2-13 and channels 14 and higher)
* UHF-only antenna (you get channels 14 and higher)
* Separate VHF and UHF antennas
B
Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF / UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U / V band mixer (not supplied). For details, see page 88.
continued
17