Sony DVP-S335 DVD Player User Manual


 
11
Getting Started
VIDEO OUT S VIDEO OUT
DIGITAL OUT
COAXIAL OPTICAL
AUDIO OUT
WOOFER
RL
PCM/DTS/MPEG/
DOLBY DIGITAL
LINE-1 (RGB) - TV LINE-2
CD
L
R
DIGITAL IN
OPTICAL
COAXIAL
INPUT
S VIDEO
Receiver (Amplifier) Hookups
This connection is for listening to the sound through
speakers connected to a receiver lacking a built-in DTS,
Dolby* Digital or MPEG decoder. Refer to the
instructions supplied with the component to be connected
as well.
zYou can enjoy surround sounds even if you connect front
speakers only
You can use 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using actual
rear speakers (VES:Virtual Enhanced Surround). For details, see
page 36.
zIf you have a digital component with a built-in DTS, Dolby
Digital or MPEG decoder
You can enjoy multi-channel surround sound by connecting the
component via the DIGITAL OUT OPTICAL or COAXIAL
connector using an optical or coaxial digital connecting cord (not
supplied). For details on hookups and settings, see page 14.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks
of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
Required cords
Audio connecting cord (not supplied) (1)
S video cord (not supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
If you have a digital component such as a receiver (amplifier)
with a digital connector, DAT or MD, connect the component via
the DIGITAL OUT OPTICAL or COAXIAL connector using an
optical or coaxial digital connecting cord (not supplied).
Optical digital connecting cord (not supplied) (1)
Coaxial digital connecting cord (not supplied) (1)
White (L)
Red (R)
White (L)
Red (R)
CD/DVD player
To AUDIO
OUT (R, L)
TV
To audio input
: Signal flow
Receiver
(Amplifier)
To an AC outlet
To S VIDEO
OUT
To S VIDEO
input
To DIGITAL
OUT
(OPTICAL)
Take off the
cap.
To
DIGITAL
OUT
(COAXIAL)
or
or
To optical digital input
To coaxial digital input
Receiver
(Amplifier) with
a digital
connector, MD
deck, DAT deck,
etc.