Filter
Top Products
57
Settings and Adjustments
x MPEG
Selects the MPEG AUDIO signals to be output via the
DIGITAL OUT OPTICAL and COAXIAL connectors. You
cannot select this item when you set “DIGITAL OUT” to
“OFF.”
•
PCM: when the player is connected to an audio
component lacking a built-in MPEG decoder. If you
play MPEG AUDIO sound tracks, the player outputs
stereo signals via the DIGITAL OUT OPTICAL and
COAXIAL connectors.
• MPEG: when the player is connected to an audio
component having a built-in MPEG decoder.
If the player is connected to an audio component
lacking a built-in MPEG decoder, do not set this.
Otherwise, when you play the MPEG AUDIO sound
track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to be
damaged.
Note
The player outputs the MPEG analog audio sound only from the
front speakers when you set “DIGITAL OUT” in “AUDIO
SETUP” to “ON” and then set “MPEG” to “MPEG.”
x DTS
Selects the DTS signals to be output via the DIGITAL OUT
OPTICAL and COAXIAL connectors. You cannot select
this item when you set “DIGITAL OUT” to “OFF.”
•
OFF: when the player is connected to an audio
component lacking a built-in DTS decoder.
• ON: when the player is connected to an audio
component having a built-in DTS decoder.
If the player is connected to an audio component
lacking a built-in DTS decoder, do not set this.
Otherwise, when you play the DTS sound track, a loud
noise will come out from the speakers, affecting your
ears or causing the speakers to be damaged.
Note
Select the setting correctly. Otherwise, no sound or a strange
sound will come out from the speakers, affecting your ears or
causing the speakers to be damaged.
When you have connected a subwoofer, specify the size of
the front speakers you have connected to change the
frequency range output from the subwoofer so that you
can obtain the best possible surround sound.
Even if you change the “SUBWOOFER” setting, the sound
output from the front speakers do not change.
For the speaker hookups, see pages 12 and 13.
The default settings are underlined.
Select “SPEAKER SETUP” in the setup display.
x SUBWOOFER
Selects whether a subwoofer is connected to the player or
not.
• NONE: When a subwoofer is not connected to the
player.
•
YES: When a subwoofer is connected to the player.
When you select “YES,” set “FRONT SPEAKER SIZE.”
For details, see “Setting the output level from the
subwoofer.”
Subwoofer Set Up
(SPEAKER SETUP)
SPEAKER SETUP
SUBWOOFER:
To set, press , then .
To quit, press .
ENTER
YES
FRONT SPEAKER SIZE: MIDDLE
DISPLAY