33
Using Various Functions with the Control Menu
1: ENGLISH
PCM 48kHz 24bit
PROGRAM FORMAT
AUDIO
Select:
ENTER
1: ENGLISH
AUDIO
Select:
ENTER
DOLBY SURROUND
DOLBY DIGITAL 2/0
L RC
S
PROGRAM FORMAT
1: ENGLISH
AUDIO
Select:
ENTER
LRC
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
1: ENGLISH
AUDIO
Select:
ENTER
LR
MPEG 2/2
PROGRAM FORMAT
LS RS
Displaying the audio information of the
disc
When you select “AUDIO,” the channels being played are
displayed on the screen.
In Dolby Digital format, multiple signals ranging from
monaural to 5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number of the
recorded channels may be different.
* “PCM,“ “DTS,” “DOLBY DIGITAL“ or “MPEG“ is
displayed. In case of “DOLBY DIGITAL,” the channels
in the playing track are displayed by numbers as
follows:
The case of Dolby Digital 5.1 ch:
** The letters in the program format display mean the
following:
L: Front (left)
R: Front (right)
C: Center (monaural)
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural) – the rear component of the
Dolby Surround processed stereo signal and the
Dolby Digital signal.
LFE: – LFE (Low Frequency Effect)
Front component 2
+ Center component 1
Rear component 2
LFE (Low
Frequency Effect)
component 1
Current
audio
format*
Current
playing
program
format**
DOLBY DIGITAL
3 / 2. 1
DVD
AUDIO
1: ENGLISH
1 8
(
3 4
)
1 2
(
2 7
)
C
0 1 : 3 2 : 5 5
LRC
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
Select:
ENTER
The display examples are as follows:
•PCM (stereo)
•Dolby Surround
•Dolby Digital 5.1ch
“LFE” appears only when a disc contains an LFE signal
component. “LFE” remains on the “PROGRAM
FORMAT” display even if the LFE signal component is
not being output.
•MPEG