Filter
Top Products
4-1 Preparations for Recording
• When the input signal is component video, the meters
indicate the Y, R-Y, and B-Y levels. The maximum
values for R-Y and B-Y correspond to a 75 % color
bar signal.
3 If the input level of a composite signal is not 1 Vp-
p signal, use a screwdriver to turn the VIDEO
LEVEL control to adjust the input level.
It is not possible to adjust the input level of signals
other than composite video.
•When the input signal is analog composite video, the
meter indicates the sync signal level.
• When the input signal is digital in SDI format, the
display indicates whether or not a signal is present.
Signal input to CAMERA connector
Signal input to SDI IN connector
4-4 Chapter 4 Recording