Filter
Top Products
Recording the same audio signals on
channels 3 and 4 as on channels 1 and 2
Selecting the input audio signals
Select the input audio signals as follows:
When the video input is digital
When the video input signal is digital in SDI format, it
is possible to select in a setup menu whether to use the
audio signals included in the SDI signal, or analog
signals input to the AUDIO IN or CAMERA
connectors. The settings for channels 1 and 2 and for
channels 3 and 4 are independent.
For details of the setup menu operation, see Section 6-3
"Setup Menu
Settings,
"
items "INPUT 1/2" and
"INPUT
3/
4" in the <AUDIO> menu (page 6-4).
When the "ANALOG" setting is selected, choose the
audio input signal in the same way as for analog video
input signals.
When the video input is analog
If the video input is analog, regardless of the setup
menu settings, the audio input is also analog. Use the
CAMERA/LINE switches to select the analog signals
for the audio input.
• To select the audio signal input to the CAMERA
connector, move the switch to the CAMERA
position.
• To select the audio signal input to an AUDIO IN
connector, move the switch to the LINE position.
Selecting the input audio signals
By means of a setup menu setting, it is possible to
record the same audio signals on channels 3 and 4 and
channels 1 and 2.
For details of the setup menu operation, see Section 6-3
"Setup Menu Settings," item "DOUBLE REC" in the
<AUDIO> menu (page 6-4).
Adjusting the recording levels
For analog audio inputs, it is possible to adjust the
recording level.
Adjusting the recording levels
1 Set the audio input level switches to correspond
with the input levels.
2 Press the REC button.
The unit switches to the E-E mode.
(Continued)
Chapter 4 Recording 4-5