Filter
Top Products
20
3 Close the cassette compartment
lid by pressing (PUSH) mark.
The cassette compartment automatically
slides back in.
b Notes
• Do not insert your fingers or touch the inside of
the cassette compartment when it is open. It may
cause a malfunction.
• If you touch any part of the VCR other than the
(PUSH) mark when closing the cassette
compartment, the cassette compartment may not
be closed properly.
• Do not close the cassette compartment until it
opens completely. It may cause a malfunction.
z Tips
• The recordable time varies depending on [DV
REC MODE] (p. 56).
To eject the cassette tape
Open the cassette compartment following
the same procedure as described in step 1
and remove the cassette tape.
You can use a “Memory Stick Duo” media
marked with or
only (p. 80).
Insert the “Memory Stick Duo” media
into the “Memory Stick Duo” media
slot in the right direction until it
clicks.
b Notes
• If you insert the “Memory Stick Duo” media
into the slot in the wrong direction, the
“Memory Stick Duo” media, the “Memory Stick
Duo” media slot or image data may be damaged.
To eject the “Memory Stick Duo”
media
Lightly push the “Memory Stick Duo”
media once.
b Notes
• When the access lamp is lit or flashing, the VCR
is reading/writing data. Do not shake or knock
the VCR, turn the power off, eject the “Memory
Stick Duo” media, or remove the battery pack.
Otherwise, image data may be damaged.
• When inserting or ejecting the “Memory Stick
Duo” media, be careful with the “Memory Stick
Duo” media from popping out and dropping.
(PUSH) mark
“Memory Stick Duo” media
“Memory Stick Duo”
media access lamp
Step 4: Inserting a cassette tape or a “Memory Stick Duo” media
(Continued)