Filter
Top Products
6-1 Basic Automatic Editing
6-8 Chapter 6 Editing
Chapter 6 Editing
6-1-7 Cuing Up and Prerolling
You can preroll the tape to a point prior to the edit start
point (preroll point), or cue up the tape to any edit
point.
Follow the procedure below to cue up or preroll the
tape.
Cuing up and prerolling
1 Press the RECORDER or PLAYER button to
select the VTR which you want to operate.
The button lights up.
2 To cue up the tape to an edit point
Press the IN, OUT, AUDIO IN, or AUDIO OUT
button while holding down the PREROLL button.
The tape moves to the edit point corresponding to
the button, then stops.
To preroll the tape
Press the PREROLL button.
The tape is rewound to a point before the edit start
point by the amount determined by the preroll time
setting.
Note
When the [F1] (TIMER SEL) button in the TC menu is
set to CTL, cuing up is slightly slower than in TC
mode. This is to maintain the accuracy of the CTL
signals.
You can set up the VTR so that priority is placed on
cuing accuracy or speed. Change the VTR setting
through 403. CUEUP BY TC and 404. CUEUP BY
CTL in the VTR SETUP menu.
6-1-6 Confirming Edit Points
Displaying the duration between two edit
points
The following six kinds of duration can be displayed in
the time data display window:
• Between IN and OUT points
• Between IN and AUDIO OUT points
• Between IN and AUDIO IN points
• Between OUT and AUDIO OUT points
• Between OUT and AUDIO IN points
• Between AUDIO IN and AUDIO OUT points
Durations are calculated as follows.
• If both IN and OUT points are set, the duration is the
time between the points.
• If one of the edit points is not set, the duration is set
to 00:00:00.
1 Press the RECORDER or PLAYER button to
select the VTR for which you want to confirm a
duration.
The button lights up.
2 Hold down any two IN, OUT, AUDIO IN, or
AUDIO OUT buttons.
The duration between the points corresponding to
the two buttons is displayed. The value can be
negative.
Displaying the duration between two edit points
Duration
between two
edit points
PLAY LOCK
TIMER
SEL
TC
CH.COND
GREEN
TC
DUR VITC 2FD F1
00Ó 01µ 00ß 00ƒ
TIMER
RESET
TIMER
SET
TIMER
HOLD
off
TC
SEL
VITC
TCG
SOURCE
int
TCG
MODE
prst
RUN
MODE
rec
DF/NDF
df
VITC
TCG
ÅIN 00:01:10:00 ÅOUT 00:02:10:00
IN 00:01:20:00 OUT 00:02:20:00
1
2