Sony HKDV-501A DVD VCR Combo User Manual


 
Menu List
A-20 Appendix
Appendix
The values enclosed in a box are factory settings.
Items Related to Operation Panels (101~)
FunctionItem Settable range
101
SELECTION FOR
SEARCH DIAL
ENABLE
Item number
Determines how the unit is set to search mode. dial
direct: The unit enters search mode when you rotate the
search dial in all modes except recording and edit modes.
via search key: The unit enters search mode when you
press the SHUTTLE, JOG or VAR button.
dial direct
via search key
102
Specifies where or not to display a warning when audio/
video reference signal selected in item 005. is not present or
out of phase with the input video signal.
off: No warning is displayed.
on : Warning is displayed by flashing STOP button.
REFERENCE
SYSTEM ALARM
off
[on]
REC INHIBIT
LAMP FLASHING
[off]
on
104 Specifies whether the REC INHIBIT indicator lights or
flashes, when REC inhibit plug on the back side of the
inserted cassette tape is pressed down.
off: The REC INHIBIT indicator lights up.
on: The REC INHIBIT indicator flashes.
107 JOG DIAL
RESPONSE
Selects the tape speed (VTR command) characteristics for
search JOG dial rotation.
TYPE1: Tape speed changes linearly in a range of 1 to +1
times normal tape speed.
TYPE2: Tape speed changes in a range of 2 to +2 times
normal tape speed as shown below in TYPE 2. (Tape
speed does not change when the search dial is within a
range of ±1 times normal tape speed.)
TYPE3: Tape speed changes linearly in a range of 2 to +2
times normal tape speed as shown below in TYPE 3.
[type1:–1to+1]
type2: 2 to + 2
type3: 2 to + 2
speed
speed
rotation
rotation
FWD
+2
+1
RVS
-1
-2
FWDRVS
TYPE2
FWD
+2
RVS
-2
FWDRVS
TYPE3
109 KEY INHIBIT [off]
on
When this is set to on, the KEY INHIBIT indicator in the
upper control panel lights, and some, all, or a group of the
following buttons are disabled: REMOTE button on the
upper control panel, AUDIO INPUT/MONITOR SELECT
button, editing operation buttons on the lower control panel.
For details of the keys and buttons disabled by this setting,
see item 110.