Filter
Top Products
Chapter 4 Menu Settings 4-29
Chapter 4 Menu Settings
4-3-11 Displaying the Pull Down
Time Code (when HKDV-507/
507D is installed)
To display the pull down time code, follow the steps
below.
1 Press the TC button, then press the ALT button.
2 Press the [F4] (PDTC DISP) key to select “on”.
on: Displays the pull down time code.
off: Does not display the pull down time code.
PLAY LOCK
TAPE
TIMER
CH.COND
GREEN
ALT+TC
TCR 2FD F1
00
Ó
00
µ
00
ß
00
ƒ
PDPSET
MENU
12H
PDTC
DISP
off
TC
CONV
off
PD
CHARA
off
CHARA
SUPER
off
CHARA
H-POS
10
CHARA
V-POS
10
VITC
POS-1
16
VITC
POS-2
16
PD
00
Ó
00
µ
00
ß
00
ƒ
ÅIN 00:01:10:00 ÅOUT 00:02:10:00
IN 00:01:20:00 OUT 00:02:20:00
1
2
4-3-10 Conversion of Time Code
During Playback in 25F Mode (TC
CONV)
When the cassette tape recorded in 24F mode is played
back in 25F mode (off-speed playback), it is possible
to convert 24-frame time code to the 25-frame time
code.
To convert the time code, follow the steps below.
1 Press the TC button, and then press the ALT
button.
The ALT+TC menu appears.
2 Press the [F3] (TCCONV MENU) button.
The TC CONVERT menu appears.
3 Press the [F3] (TC CONV) button to select “on.”
Each time you press the button, “on” and “off”
alternate.
on: 24-frame time code is converted to 25-frame time
code.
off: 24-frame time code is not converted to 25-frame
time code.
Notes
• This setting is only active when the frame frequency
of the unit is 25PsF or 50i.
• This setting is effective only for the VITC and time
code of SONY 9PIN protocol. From the TIME
CODE OUT connector, 24 frames time code is
output.
1
2,3