Filter
Top Products
2-1 Control Panel
2-2 Chapter 2 Locations and Functions of Parts and Controls
Chapter 2 Locations and Functions of Parts and Controls
2-1-1 Upper Control Panel
Upper control panel
1 DISPLAY FULL/FINE button
Changes the display range of the audio level meters.
FULL: Display range is –60 to 0 dB (peak level = 0
dB) or –40 to +20 dB (peak level = +20 dB).
Use 814. LEVEL METER SCALE in the VTR
SETUP menu to select the range.
FINE: Displays the audio level in 0.25 dB
increments. The center LED lights up in each
meter as a signal level reference. When the level
exceeds the maximum display value, the top LED
flashes. When the level falls below the minimum
display value, the bottom LED flashes.
2 PHONES jack
Connects stereo headphones with 8 Ω impedance for
audio monitoring during recording, playback, and
editing. Adjust the headphone output level with the
PHONES level control.
3 POWER switch
Turns on the power. When the power is turned on, the
audio level meters and menu display in the lower
control panel light up.
DIGITAL VIDEO CASSETTE RECORDER HDW-F500
!£REMOTE buttons and RS-232C indicator
!™REFERENCE signal indicators
!¡AUDIO INPUT/MONITOR SELECT buttons
!ºINPUT SELECT button
8MONITOR SELECT button
1DISPLAY FULL/FINE button
2PHONES jack
3POWER switch
4PHONES level control
5PB level
controls
6REC level controls
7Audio level meters
9Indicator window