Sony HKDV-502 DVD VCR Combo User Manual


 
Menu List
A-34 Appendix
Appendix
FunctionItem number
Items Related to the Video Control (701~)
The values enclosed in a box are the factory settings.
Item Settable range
701 VIDEO INPUT
select
[SDI]
SDTI
Selects the input video signal.
SDI: The SDI video signal input to the HD SDI INPUT
connectors.
SDTI (Only when the optional HKDV-506A SDTI Board is
insalled.): The SDTI video signal (270 Mbps) input to the
SDTI (OPTION) IN connector.
706 FORCED
VERTICAL
INTERPOLATION
OFF
[auto]
forced YADD off
Specifies whether Y-add operation mode is automatically
turned on during DT playback or not.
auto: Y-add operation mode is automatically turned on.
forced YADD off: Y-add operation mode is off all the time.
..........................................................................................................................................................................................................
1) A-ROUNDING™
A method for rounding a 10 bit signal to 8 bits. This
process suppresses step noise that occurs when lines
which differ slightly from the horizontal are displayed.
A-ROUNDING is a trademark of Sony Corp.
707 ROUNDING [simple]
adaptive
Specifies whether or not A-ROUNDING
1)
performed.
simple: A-ROUNDING is not used. 10 bit input signals
changed to 8 bits by normal rounding (rounding down
numbers of 4 or less and rounding up numbers of 5 or
more).
adaptive: A-ROUNDING is applied. 10 bit signals are
rounded to 8 bits.
708 MASTER LEVEL
(HD)
preset: 100%
(4000H)
0.0% (0H)
.
.
.
[100%ª4000Hº]
.
.
.
141.3% (5A70H)
Adjusts the level of the HD video signal output from the HD
SDI OUTPUT connectors. Simultaneously adjusts the Y, P
B,
and P R levels.
709 Y LEVEL (HD)
preset: 100%
(4000H)
0.0% (0H)
.
.
.
[100%ª4000Hº]
.
.
.
141.3% (5A70H)
Adjusts the level of the HD video signal output from the HD
SDI OUTPUT connectors. Adjusts the Y level of the video
signal.