Sony HKDV-502 DVD VCR Combo User Manual


 
Chapter 4 Menu Settings 4-45
Chapter 4 Menu Settings
Changing time data
To enter the current time data
1 Use the cursor buttons to move the cursor () to
the line where the time code will be written.
To move the cursor using the numeric
buttons
With the cursor specifying Time, Mrk, IN, OUT or
the recording starting point section in the TELE
FILE menu display, enter the line number using
the numeric buttons. Then press the [F9]
(CUENUM POINT) button. The cursor will move
to the line specified by the numeric buttons.
Note
If the cursor () is not linked with the cursor
buttons, the cursor () will not move when the
cursor buttons are pressed.
To link the cursor () with the cursor
buttons
Press the center cursor button. Each press of the
button alternately links and unlinks the cursor () .
2 Press the ENTRY button.
The time data in the column specified by the cursor
() changes to the current time code.
Note
If the cursor () is not on the screen when the
ENTRY button is pressed, the time data on the line
currently specified by the cursor () changes to the
current time data, and the line is automatically
displayed.
To insert the current time data on a new line
1 Use the cursor buttons to position the cursor ()
below the line where the time code will be
inserted.
For details on how to move the cursor, see To enter the
current time data above.
2 Press the ENTRY button while pressing down the
SFT button.
A new line is inserted above the line specified by
where the cursor () is placed and the current time
code is entered on that line.
To delete a time code
1 Use the cursor buttons to move the cursor to the
Time section to be deleted.
To move the cursor using the numeric
buttons
With the cursor specifying Time, Mrk, IN, OUT or
the recording starting point section in the TELE
FILE menu display, enter the line number using
the numeric buttons. Then press the [F9]
(CUENUM POINT) button. The cursor will move
to the line specified by the numeric buttons.
2 Press the [F5](DEL POINT) button.
A message appears (in the control panel display)
requesting confirmation of the deletion operation.
To delete the line as well as the time code
Press the [F5] (DEL POINT) button while pressing
down the SFT button.
The line is deleted and all the lines below are
moved up by one.
3 Then, press the [F5] (DEL POINT) button while
pressing down the SFT button.
The time code section becomes blank and is ready
for new time code input.
To undo the deletion of a time code or line
Press the ALT/[F2] (UNDO ALL) buttons.
A message appears (in the control panel display)
requesting confirmation of the undo operation.
Press the [F2] (UNDO ALL) button while pressing
down the SFT button. To cancel the undo
operation, press the CLR button.
CUE
SCAN
CH.COND
TELE FILE
TCR 00:00:00:00
COMMNT
EDIT
ENTRY
POINT
CHANGE
DATA
DEL
POINT
MARK PRO-
TECT
TAPE
INFO
CUENUM
POINT
WRITE/
EXIT
REC DATE[1998/02/10] Rest 50%
No. Time Mrk IN
0 00:01:02:03 NG 00:01:01:03
1 --:--:--:-- KP --:--:--:--
2 00:03:04:03 OK @ 00:03:03:03
3 00:04:04:03 OK 00:04:03:03
4 00:05:05:03 NG 00:05:04:03
5 00:06:06:03 OK 00:06:05:03
6 --:--:--:--
TITLE[NAGANO JUMP LARGE HILL]