Chapter 3 Dubbing/Editing
Chapter 3 Setting the Time Code 53
HVR-M25U/M25N/M25E/M25P time codes
The unit has a HDV/DV jack. The time code
displayed and recorded on the tape differs as shown
below when INPUT SELECT switch is set to HDV/
DV and when it is set to other than HDV/DV.
EE
INTERNAL
HDV/DV
S VIDEO
VIDEO
EXTERNAL
HDV/DV
S VIDEO
VIDEO
[HDV/DV IN
TC] menu
INPUT SELECT
switch
Mode
Time code/User bits displayed and recorded
Playback
Playback
Audio dubbing
Playback at various
speeds
a)
DUB1
b)
Time code/user bits on the tape
Duplicate
DUPLICATE
PLUS1
b)
Time code/user bits of another device connected to HDV/
DV jack
c)
Recording
Recording Pause
REC1
b)
Time code/user bits internally generated
c)
When the input signal is HDV: User bits input via HDV/DV
Recording
Recording Pause
REC1
b)
Time code/user bits internally generated
c)
Duplicate
DUPLICATE
PLUS1
b)
Time code/user bits of another device connected to HDV/
DV jack
c)
Recording
Recording Pause
REC1
b)
Time code input of another device connected to HDV/DV
jack and user bits internally generated
When the input signal is HDV: Time code/user bits of
another device connected to
HDV/DV jack.
Recording
Recording Pause
REC1
b)
a) This includes stop, fast-forward or rewind. If the unit
cannot read the time code on the tape correctly, the
counter displays “– –:– –:– –:– –”.
b) “DUB1”, “DUPLICATE PLUS1” and “REC1” represent
the state of the unit when you press each of these buttons
(AUDIO DUB, DUP or REC) in the stop mode.
c) The time code is also displayed on the time counter
screen. For details on the time counter, see page 26.
Time code/user bits internally generated
c)