Filter
Top Products
14 Chapter 1 Overview
Chapter 1 Overview
3 REC (record) button / indicator
8 PAUSE button / indicator
4 FF (fast forward) button / indicator
5 PLAY button / indicator
6 REW (rewind) button / indicator
7 STOP button
1 AUDIO DUB (audio dubbing)/
(A3) button / indicator
2 DUPLICATE PLUS button
/ indicator
2 Tape transport control section
1 AUDIO DUB (audio dubbing)/ (A3) button /
indicator
Use this button to dub sounds. The indicator lights
while sounds are being dubbed. Also, this button can
be used as ASSIGN (A3) button.
For details on audio dubbing, see “Audio Dubbing” on
page 60.
When the unit is in the stop mode and INPUT
SELECT switch is set to other than HDV/DV, you can
check EE signals of the sound (channels 3 and 4) to be
dubbed by pressing this button. While the operation is
in progress, the indicator lights. To stop the operation,
press STOP button.
For details, see “EE/PB SEL” in “IN/OUT REC” menu on
page 71.
When you change ASSIGN buttons setting with
[ASSIGN (A3)] of [ASSIGN BTN] in [OTHERS]
menu, this button executes the function you have set.
For details on ASSIGN buttons, see “ASSIGN BTN” on
page 77.
2 DUPLICATE PLUS button/indicator
Use to duplicate a tape, including the time code. While
duplication is in progress, the indicator lights.
For details on the duplicate function, see “Duplication
(generating a work tape with the same time code)” on page
56.
When the unit is in the stop mode and HDV/DV
signals is selected and input, you can check EE signals
for an image, sound and time code by pressing this
button. While you are checking EE signals, the
indicator lights. To stop this operation, press STOP
button.
For details, see “EE/PB SEL” in “IN/OUT REC” menu on
page 71.
For details on time codes, see “HVR-M25U/M25N/M25E/
M25P time codes” on page 53.
3 REC (record) button / indicator
When you press and hold this button, then press PLAY
button, the each indicator lights and recording starts. If
you press this button while the tape is stopped, you can
check EE picture and audio signals for a moment.
When HDV/DV is selected, if [HDV/DV IN TC] in
[TC/UB SET] menu is set to [EXTERNAL], you can
also check the EE time code signals. Press STOP
button to end the check.
For details, see “EE/PB SEL” in “IN/OUT REC” menu on
page 71.
For details on time code, see “TC/UB SET” on page 75.
Location and Function of Parts