Sony HVR-M25E VCR User Manual


 
Chapter 6 Maintenance 85
Chapter 6 Maintenance
Symptom Cause/Remedy
The output from S VIDEO OUT jack and
VIDEO OUT jack is different from [DOWN
CONVERT] setting of [VIDEO OUT] in [IN/
OUT REC].
The output from S VIDEO jack and VIDEO jack is set as follows.
• When the playback format is set shown below, the output from S VIDEO jack or
VIDEO jack is fixed in EDGE CROP.
• When the playback format is set shown below, the output from S VIDEO jack or
VIDEO jack is fixed in LETTER BOX.
Menu item Setting
Playback format HDV (HDV1080i)
[VIDEO OUT] in
[DOWN CONVERT]
SQUEEZE or
LETTER BOX
[IN/OUT REC]
[HDMI/CMPNT] 480p/480i, 576p/576i
[i.LINK SET] in
[HDV t DV CONV] DVCAM or DV SP
[IN/OUT REC]
[DOWN CONVERT] Set to EDGE CROP
Menu item Setting
Playback format
HDV (HDV1080i or
HDV720p)
[VIDEO OUT] in [HDMI/CMPNT] 480i, 576i, 480p/480i,
[IN/OUT REC] 576p/576i
[ALLSCAN MODE] in [DISPLAY SET] ON
Recording/Dubbing
Symptom Cause/Remedy
Whenever you connect the unit to an AC
outlet, the unit automatically starts
recording.
Even though KEY INH switch is set to ON,
the unit starts recording/playback by itself.
No picture is output via HDV/DV jack.
• TIMER switch is set to REC.
t When TIMER switch is set to REC, the unit starts recording whenever the
power is connected. Set TIMER switch to OFF.
• TIMER switch is set to REPEAT or REC.
t TIMER switch setting has a higher priority than KEY INH switch setting. Set
TIMER switch to OFF.
• When [COMMANDER] in [OTHERS] menu is set to [WIRELESS], the unit
responds to signals from Remote Commander even though KEY INH switch is set
to ON.
t Set [COMMANDER] to [CONTROL S].
t Reconnect the i.LINK cable (not supplied).
• INPUT SELECT switch is set to a position other than HDV/DV.
t Set the switch to HDV/DV.
t Set [HDV/DV SEL] in [IN/OUT REC] menu correctly.
(Continued)