Filter
Top Products
3
KD-34XBR970
2-671-222-21(1)
Setting Up the TV
Overview
This chapter includes illustrated instructions for setting up your TV.
About the AC
Power Cord
The AC power cord is attached to the rear of the TV with a hook. Use
caution when removing the AC plug from its holder. Gently slide the
plug upward to remove it from the hook. Once removed, the AC
power plug should automatically disengage from its stored location.
TV Controls and Connectors
Front Panel
✍
Do not plug in the AC power cord until you have made all other connections.
You can detach
the cord from
this hook
AC power
cord
Item Description
1 S VIDEO
VIDEO 2 INPUT
Connects to the S VIDEO OUT jack on your camcorder or other video equipment that has
S VIDEO. Provides better picture quality than composite video (
2
).
2 VIDEO/L(MONO)-AUDIO-R
VIDEO 2 INPUT
Connects to the composite A/V output jacks on your camcorder or other video
equipment.
3 MENU
Press to display the Menu. Press again to exit from the Menu. For details, see “Using the
Menu” on page 33.
4
V v B b
Press
V v B b
to move the TV’s on-screen cursor.
5
Press to select an item in the TV’s Menu.
6 TV/VIDEO
Press repeatedly to cycle through the video equipment connected to the TV’s video inputs.
7 -VOLUME +
Press to adjust the volume.
8 -CHANNEL+
Press to scan through channels. To scan quickly through channels, press and hold down
either
CHANNEL
button.
9 TIMER/STAND BY LED
Blinks when the TV is turned on, then shuts off when the picture is displayed. If the LED
blinks continuously, this may indicate the TV needs service (see “Contacting Sony” on
page 50). When lit, indicates one of the timers is set. When the timer is set, this LED will
remain lit even if the TV is turned off. For details, see page 47.
0 Infrared Receiver (IR)
Receives IR signals from the TV’s remote control.
qa POWER
Press to turn on and off the TV.
S VIDEO
VOLUME
STAND BY
TIMER
POWER
VIDEO
L(MONO) – AUDIO – R
VIDEO 2 INPUT
CHANNEL
TV/VIDEO
+
_
MENU
3
1
2
7
4
9
8
5
6
qa
q
;