Sony KD-34XBR970 CRT Television User Manual


 
47
Menus SETUP MenusSETUP MenusSETUP
KD-34XBR970
2-671-222-21(1)
Using the Applications Settings
Selecting
Applications
Options
The Applications Settings include the following options:
To access the Applications Settings, follow these steps:
Press V / v to highlight.
Press to select.
1. Display Menu 2. Highlight and
select
3. Highlight and
select
Antenna
Applications
Clock/Timers
Diagnostics
Exit:
MENU
Option Description
Clock/Timers
Select to set the clock, set the Sleep timer, and to program
your TV to turn on and off at two scheduled viewing times.
Sleep
Set the time in minutes (
15min
,
30min
,
45min
,
60min
,
90min
,
120min
or
Off
) that you want the TV to remain
on before shutting off automatically.
Timer 1
Timer 2
You can use the Timers to program
the TV to turn on and off and tune
to a specific channel at two
scheduled viewing times.
Timer 1 and Timer 2 are not available to be set until you set
the Current Time.
1 Press V or v to highlight Timer 1 or Timer 2. To set the
timer, press b.
2 Press V or v to highlight one of the following options,
then press .
Program Select to set the Timer by day,
time, duration, and channel.
Off Select to turn off the Timer. (Your
previous settings are saved.)
3 If you selected Program in step 2, Press V and v to set
the day(s), hour, minute, duration, and channel
number. Press
or b to confirm each setting and
move to the next setting. Press B to go back to the
previous setting.
4 Press MENU to exit the Menu. An LED on the front
panel will light, indicating the timer has been set.
Current Time
1 Press to select Current Time.
2 Press V and v to set the current time (day, hour, and
minute). Press or b to confirm each setting and
move to the next setting. Press B to go back to the
previous setting.
3 Press MENU to exit the Menu.
Diagnostics
Displays the strength of the terrestrial digital broadcast signal,
to help you adjust your antenna to optimize signal reception.
You can also change the
Sleep options using the
SLEEP button on the remote
control.
To go directly to
programming Timer 1 or 2,
press instead of
pressing b.
z
To return to the Timer
Menu after programming one
of the Timers, press
when the highlight is in the
channel number field.
z
To return to the Timer
Menu after setting the
Current Time, press
when the highlight is in the
minute field.
z