Filter
Top Products
Introducing the Sony LCD Projection TV
17
Introducing the Sony LCD Projection TV
KDF-WE/WF655
2-059-370-14 (2)
For KDF-WE655 series
1 Turn off the power on the main unit. Wait several minutes, then unplug
the power cord.
(The cooling fan will continue to operate for about two minutes after
turning the power off.)
2 Wait at least 30 minutes after unplugging the power cord to allow the
lamp to cool down before replacing it.
Take the new lamp out of the box.
3 Loosen the screws on the rear side panel.
✍ For instruction for KDF-WF655 series, see page 20.
✍ Do not shake the lamp. Vibration can damage the lamp or shorten
its life.
✍ Avoid touching the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
This illustration is for KDF-50WE655.
The screw for KDF-42WE655 is more
to the inside.
(Continued)
01COV.book Page 17 Thursday, February 17, 2005 8:01 PM