Filter
Top Products
Introducing the Sony LCD Projection TV
22
KDF-WE/WF655
2-059-370-14 (2)
Push the cover back on. Make sure that the hole on the cover aligns with
the hole on the unit. Reattach the lamp cover by tightening the screw.
7 Reattach the front panel securely.
8 Tightly screw the side panel in its place.
✍ If the lamp cover screw is inserted incorrectly, the lamp may not
operate properly. In such a case, remove the screw, insert it
correctly and then tighten the screw completely (see page 126).
✍ If the lamp cover is not reattached securely, the self-diagnostic
function may be triggered and the POWER/STANDBY indicator
flashes three times (see page 126).
✍ Consult your Sony dealer for a Sony XL-2200 (for WF655 series)
replacement lamp.
✍ Take great care when replacing the lamp or plugging in/unplugging
the connecting cords. Rough handling may cause the LCD
projection TV to fall, damaging the TV, the TV stand and/or the floor.
S
T
D
/
D
U
O
P
O
W
E
R
P
R
O
01COV.book Page 22 Thursday, February 17, 2005 8:01 PM