Filter
Top Products
23
GB
Using Optional Equipment
Viewing pictures from
connected equipment
Turn on the connected equipment, then
perform one of the following operation.
For an auto-tuned VCR page 6
In analogue mode, press PROG/CH +/–, or the
number buttons, to select the video channel.
For other connected equipment
Press to display the connected equipment list.
Press F/f to select the desired input source, then
press . (The highlighted item is selected if two
seconds pass without any operation after pressing
F/
f.)
For a USB device
See page 24.
~
• Be sure to use only an authorised HDMI cable bearing
the HDMI logo. We recommend that you use a Sony
HDMI cable.
• When HDMI control compatible equipment is
connected, communication with the connected
equipment is supported. Refer to page 27 to set up this
communication.
Symbol on the
screen
Description
Component To see the equipment connected to
G.
HDMI1 or
HDMI2
HDMI IN 1 or HDMI IN 2
To see the equipment connected to
A or B.
Digital video and audio signals are
input from the connected equipment.
If the equipment has a DVI socket,
connect the DVI socket to the HDMI
IN 1 socket through a DVI-HDMI
adaptor interface (not supplied), and
connect the equipment’s audio out
sockets to the audio in sockets in the
HDMI IN 1 sockets.
Connect to the HDMI IN 2 socket,
to view photographs or screen
images from a PC or digital video
camera.
AV1
To see the equipment connected to
D.
Inputs
Digital
Analogue
AV1
AV2
HDMI1
HDMI2
DVD
Component
PC
PC To see the equipment connected to
C.
z
• It is recommended to use a PC cable
with ferrites like the “Connector, D-
sub 15” (ref. 1-793-504-11,
available in Sony Service Centre), or
equivalent.
AV2 To see the equipment connected to
J.
When connecting mono equipment,
connect to the AV2 L socket.
To connect Do this
Conditional
Access Module
(CAM) H
To use Pay Per View services.
For details, refer to the instruction
manual supplied with your CAM.
Turn off the TV when inserting or
removing your CAM.
~
• CAM is not supported in some
countries/regions. Check with your
authorised dealer.
USB I You can enjoy photo/music/video
files stored in a Sony digital still
camera or camcorder (page 24).
Hi-Fi audio
equipment F
Connect to the audio output sockets
to listen to the sound from the
TV on Hi-Fi audio equipment.
Audio level of the external speakers
can be modified by pressing the
volume buttons on the remote.
DIGITAL
AUDIO OUT
(OPTICAL) E
Use an optical audio cable.
i K Connect to the i socket to listen to
sound from the TV on headphones.
m L Connect a microphone to the m
socket to enjoy the karaoke function.
Symbol on the
screen
Description
Continued