Filter
Top Products
i-Manual Print Font Size
Basic Operations
Parts Description
Watching TV
Using Other Devices
Using “BRAVIA” Sync
Devices
Useful Functions
Using Internet
Using Home Network
Configuring Various
Settings
Troubleshooting
How to Use Bookmarks
Top Page > Troubleshooting > Home Network Symptoms
Home Network Symptoms
Your TV cannot connect to the server.
A message appears stating that the TV cannot connect to your network.
Server is inaccessible.
Some media files in the USB device or server are not displayed.
When using the renderer function, music files cannot be played back.
Your TV cannot connect to the server.
Check the LAN cable or wireless connection to your server and your TV.
Check if your network is properly configured on your TV.
A message appears stating that the TV cannot connect to your network.
Check the current network settings. Press the HOME button, then select [Settings] → [Network]
→ [Network Setup] → [View Network settings and status]. Check your network connections and/or
server’s instruction manual for connection information, or contact the person who set up the network
connection (network administrator).
Reconfigure your network settings by pressing the HOME button, then select [Settings] →
[Network] → [Network Setup].
If the LAN cable is connected to an active server and the TV has acquired an IP address, check
your server’s connections and configurations. Press the HOME button, then select [Settings] →
[Network] → [Network Setup] → [View Network settings and status].
Server is inaccessible.
Check your LAN cable/wireless connection or your server connections. The TV may have lost
connection with the server.
Perform [Media Server Troubleshooting] to check if your media server is properly communicating
with the TV. Press the HOME button, then select [Settings] →
[Network] → [Home Network
Setup] → [Media Server Troubleshooting].
Some media files in the USB device or server are not displayed.
Unsupported files may not be displayed.
The accessible file or folder limit in a directory is 1,000 for USB and 30,000 for a server. This limit
includes non-supported files or just folders. Files or folders are populated based on their
timestamps. Photo, music files or folders exceeding the limit will not be displayed.
When using the renderer function, music files cannot be played back.
188