Filter
Top Products
106
Other Info SETUP Other InfoSETUP OtherSETUP
TV makes “popping” sound
when turned on
❏ This is a normal sound that results from the TV automatically degaussing
each time it is turned on.
TIMER/STAND BY LED on
front panel is lit
❏ The LED (see page 14) blinks when the TV is turned on, then shuts off
when the picture is displayed. If the LED blinks for more than a minute,
this may indicate the TV needs service. When lit, indicates that the timer is
set (page 97). When the timer is set, this LED will remain lit even when the
TV is turned off.
Digital cable box does not
work
❏ If you are connecting a VCR and digital cable box using a splitter, as
described on page 26, you must use a special bi-directional splitter that is
designed to work with your digital cable box. Contact your cable TV
company for details.
Cannot record digital
channels to VCR
❏ Only analog channels can be recorded to your VCR.
Problem Possible Remedies
AX1X_Digital.book Page 106 Thursday, June 17, 2004 10:05 AM