Filter
Top Products
49
SETUP SETUP SETUPRemote Control SETUPSETUP
qg RESET Press to reset the settings to the factory defaults. See pages
85 and 87. Also used to clear Favorite Channels, (see
page 64), and Manual Convergence (see page 46).
qh SLEEP Press repeatedly until the TV displays the time in minutes
(15, 30, 45, 60, or 90) that you want the TV to remain on
before shutting off automatically. To cancel press until Sleep
Off appears. While the Sleep feature is set, press once to
display the remaining time.
qj SAT/CABLE
POWER
Press to turn on and off the satellite receiver or cable box.
qk TV POWER Press to turn on and off the TV.
ql DISPLAY Press once to display the current channel number, current
time, current Wide Mode, and program information banner
(if set). Press again to turn Display off.
w; TV/VIDEO Press repeatedly to cycle through the video equipment
connected to the TV’s video inputs.
wa MENU Press to display the Menu. Press again to exit from the
Menu. For details, see page 83.
ws FAVORITES Press to display the Favorite Channels list. For details, see
page 64.
wd TV FUNCTION Press to have the remote control operate the TV.
wf When the remote control is in DVD/VCR FUNCTION mode, the
F1 and F2 buttons control specific DVD and VCR functions.
For details, see “Using the F1 and F2 Buttons” on page 53.
When the remote control is in TV mode, press to display the
Memory Stick Index. For details, see “Using the Memory
Stick Viewer” on page 67.
wg ANT Press to switch between the sources connected to the TV’s
VHF/UHF and CABLE inputs.
GUIDE When the remote control is set to operate the satellite
receiver, press to display the program guide for the satellite
receiver.
wh Press repeatedly to step through the Audio Effect options.
Also available in the Audio Menu. For details, see page 86.
TV/SAT When the remote control is set to operate the satellite
receiver, press to switch between the satellite receiver’s TV
and SAT (satellite) inputs.
wj CH +/- Press to scan through channels. To scan quickly through
channels, press and hold down either CH button.
wk JUMP Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel
that was selected.
wl
MTS/SAP Press repeatedly to cycle through the Multi-channel TV
Sound (MTS) options: Stereo, Auto SAP (Second Audio
Program), and Mono. Also available in the Audio Menu. For
details, see “Using the Audio Menu” on page 86.
Button Description
F1
F2
F1
AX1X_Digital.book Page 49 Thursday, June 17, 2004 10:05 AM