Sony KF-50E200A Flat Panel Television User Manual


 
4
GB
Safety Information
To prevent fire or shock hazard, do not expose the LCD
projection TV to rain or moisture.
Dangerously high voltages are present inside the LCD
projection TV. Do not open the cabinet. Refer servicing to
qualified personnel only.
For general safety:
Do not expose the LCD projection
TV to rain or moisture.
Do not open the rear cover.
This set should be operated only from
the type of power source indicated on the serial/model
plate.
If you are not sure of the type of electrical power supplied
to your home, consult your dealer or local power
company.
For safe installation:
Never cover the slots and openings with
a cloth or other materials.
Do not block the ventilation openings.
Do not use power-line operated sets near water — for
example, near a bathtub, washbowl, kitchen sink,
swimming pool, etc.
Do not install the LCD projection TV in hot, humid or
excessively dusty places.
Do not allow anything to
rest on or roll over the
power cord, and do not
place the set where the
power cord is subject to
wear or abuse.
Do not install the LCD
projection TV where it may
be exposed to mechanical
vibrations.
Avoid operating the LCD projection TV at temperatures
below 5ºC.
If the LCD projection TV is transported directly from a
cold to a warm location, or if the room temperature has
changed suddenly, the picture may be blurred or show
poor color. This is because moisture has condensed on the
mirror or lenses inside. If this happens, let the moisture
evaporate before using the LCD projection TV.
Do not install the appliance in a
confined space, such as a bookcase
or built-in cabinet.
Do not place the set on an unstable cart, stand, table or
shelf. The set may fall, causing serious injury to a child or
an adult and serious damage to the set. Use only a stand
recommended by the manufacturer for the specific model
of LCD projection TV. An appliance and cart combination
should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and cart
combination to overturn.
When the set exhibits a distinct change in performance, it
indicates a need for service.
The TV should be installed near an easily accessible
power outlet.
For safe operations:
Do not operate the LCD projection TV on anything but
220-240 V AC, 50/60 Hz.
Do not operate the LCD projection
TV if any liquid or solid object
falls in it — have it checked
immediately.
Never push objects of any
kind into the set through the
cabinet slots as they may
touch dangerous voltage
points or short out parts that
could result in a fire or
electric shock. Never spill
liquid of any kind on the set.
Leave enough space between the LCD projection TV or
furniture and an outlet so that you can plug in/out easily.
Unplug the AC power cord during
lightning storm.