52
Additional Information
Using Optional Equipment
For mono equipment
Connect the phono plug to the L/G/S/I jack and press / repeatedly until the input symbol 2
or 2 appears on the screen.
Select the “Sound Adjustment” menu and set “Dual Sound” to “A” (see page 35).
1 Connect your equipment to the designated TV socket, as indicated on pages 49 to 51.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press the / button on the remote control
repeatedly until the correct input symbol appears on the screen.
Symbol Input Signals
1 • Audio/video input signal through the Scart connector F.
1 • RGB input signal through the Scart connector F. This symbol appears only if
an RGB source has been connected.
2 • Video input signal through the phono jack C and audio input signal through
B.
2 • S video input signal through the S video input jack D and audio input signal
through B.
4 Press the button on the remote control to return to the normal TV picture.
S
S