Filter
Top Products
— 10 —
KV-27FV16/29FV16/29FV16C/32FS12/32FS16
Connecting Your TV
7
TV, Cable box, and Cable
KV-27FS16, KV-27FV16, KV-32FS16, KV-29FV16 only
For this set up, you can switch between scrambled channels (through
your cable box) and normal (CATV) channels by pres sing .
When using PIP, the AUX input cannot be viewed in the window picture.
Cable Box
From
Cable
Rear of TV (KV-27FV16 only)
8
Operating Instructions
TV, VCR, and Cable box
1 Connect the coaxial cable from your cable service to the IN jack on
your cable box.
2 Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the IN jack on your VCR.
3 Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
(Optional connection)
4 If your VCR is equipped wi th video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on
your TV.
If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature, (see page 26).
For optimum picture quality, use S VIDEO instead of the yellow A/V cable.
S VIDEO does not provide sound, the audio cables must still be connected.
You can use the button to switch between the VHF/UHF and VIDEO
inputs.
3
Cable
4
(Optional connection)
Cable box
1
VCR
2
Rear of TV