Filter
Top Products
12
First Time Operation
5 The TV starts to automatically search and store all
available broadcast channels for you.
This procedure could take some minutes. Please
be patient and do not press any buttons,
otherwise the automatic tuning will not be
completed.
If no channels were found during the auto
tuning process then a new menu appears
automatically on the screen asking you to
connect the aerial. Please connect the aerial (see
page 8) and press OK. The auto tuning process
will start again.
6 After all available channels are captured and
stored, the Programme Sorting menu appears
automatically on the screen enabling you to
change the order in which the channels appear
on the screen.
a) If you wish to keep the broadcast channels in the
tuned order, go to step 7.
b) If you wish to store the channels in a different
order:
1 Press the or button to select the
programme number with the channel (TV
Broadcast) you wish to rearrange, then press
the button.
2 Press the or button to select the new
programme number position for your selected
channel (TV Broadcast), then press .
3 Repeat steps b)1 and b)2 if you wish to change
the order of the other channels.
7 Press the MENU button to remove the menu from the
screen.
Your TV is now ready for use
OK
Auto Tuning
Conf
Programme
Searching...
:
Channel :
System :
01
C21
I
No channel found.
Confirm
Please connect aeri
al
OK
OK
Programme Sorting
01
02
03
04
05
06
07
08
TVE
TVE2
TV3
C33
C27
C58
S02
S06
Select
Exit:
channel
MENU
, to select,
,to set
OK
Programme Sorting
01
02
03
04
05
06
07
08
TVE
TVE2
TV3
C33
C27
01 TVE
C58
S02
S06
Select
Exit:
newposition
MENU
, to select, press to return
OK
MENU