Sony KZ-42TS1E Flat Panel Television User Manual


 
26
Menu System
Unit Status
The “Unit Status” menu allows
you to check the status of this TV.
Model Name Model name of this TV.
Serial Number Serial number allocated for each TV.
Temperature If NG flashes, follow the procedure in A) below.
Fan If NG flashes, follow the procedure in B) below.
If NG lights in red, and the / (standby/sleep) indicator flashes, press the
Power switch on the TV to turn off the TV, and disconnect from the mains.
A) If “NG” appears in the “Temperature” column
Install the TV in a cool location so as to reduce the temperature of the TV.
If the ventilation openings are blocked
The ventilation openings must never be blocked or covered. Install the TV in a
well ventilated place to allow adequate air circulation.
Make sure that the / (standby/sleep) indicator stops flashing. If the
/ (standby/sleep) indicator continues to flash, consult your nearest Sony
service centre.
B) If “NG” appears in the “Fan” column
Consult your nearest Sony service centre.
StatusUnit
Model
Serial Number
Name
OK
OK
KZ32TS1E
2000001
:
:
:
:
Temperature
Fan
Cont
Mode
rast
Pict
Brightness
Colour
Sharpness
NR
Dynamic
Low
Personal1
On
:
:
Picture Adjustment
,,,to to
enter adj. menu
select
OK
Colour
Tone
Cool
: