Filter
Top Products
Using i.LINK
105
Using i.LINK
KDX-46Q005
2-592-150-12(2)
Using the i.LINK Control Panel
After you select an i.LINK device using the Device List, the TV displays the
i.LINK Control Panel, which allows you to use the TV's remote to control
the selected i.LINK device.
1 If the i.LINK Control Panel is not already displayed, press i.LINK on the
remote control.
2 Press V v B b on the remote control to navigate through the options
available in the i.LINK Control Panel.
3 Press to select a desired option.
4 Press EXIT to exit the Control Panel and view the i.LINK device full-
screen.
The i.LINK Control Panel displays the signal from the TV to the left on
screen (if available), and the signal from the currently selected device to the
right on screen.
✍ If i.LINK is pressed while the TV is displaying an analog or digital channel
(not the i.LINK device), then the Device List will appear. Select the
desired device from the list and press to display the Control Panel.
✍ To exit i.LINK mode, select DTV from the Device List or press CH +/–.
Setup
Exit i.LINK
i.LINK
Control Panel
Power
Swap Audio
Full Screen
Status: Playing. 00:00:31
Back to Device List
VICTOR HM-DH35000
52.3
The DTV window appears only if the
i.LINK menus were entered while
watching a digital TV channel
(Continued)